Solberg Manufacturing | Filters, Silencers, Vacuum Filters, Oil Mist Eliminators, Separators

Enter search terms in the box
and click 'Search'.

Part numbers must
include dashes.

Recent Headlines

ISO Flange Vacuum Filters

Wide variety of inlet vacuum filters with ISO-NW, -K Flanges

VTL Series, VTS Series

Vacuum Trap

SME Series

Oil Mist Eliminators


Product Spotlights, Demonstrations

WL Series

Medium to High Vacuum Filtration

RST Series 1” - 4”

RST-Series Datasheet US

HV Series 1” - 4”

Medical Vacuum Filtration

Vacuum System Protection

System Protection and Vacuum Extraction.

The Challenge

The customer manufactures chip (normally metal) disposal systems and recycling systems. This system transports coarsely broken-up dry or low-drip chips above-floor via a vacuum pipe system and feeds them to a central processing unit.

In spite of the customer’s systematic attempts to fully strip and dry the chips, there is a good amount of liquid and oil in the process.  Solberg was asked to assist in protecting their vacuum system

The Solution

Solberg reviewed the whole process. The specific capacity of the vacuum pump was reviewed, along with the history of liquid collection to insure the adequate flow and collection capacity.

Solberg recommended the SRS Series to removed the liquid as well as provide filtration. Solberg also recommended a CEG media filter element to remove the oil and oil vapor.

The system has been running very well removing any additional liquid or oil that may contaminate their vacuum system. The oil vapor has been eliminated thanks to the CEG media.

The Solberg LRS/SRS System

SRS Series Integrated Liquid Separator/Vacuum Filter design consists of the following:

Vacuum rated tank assembly
Integrated baffle mechanism
Carbon steel housing construction with blue epoxy coating standard
- Stainless steel housings available
Sight and drain ports
Significant liquid and/or slurry holding capacity
“L” styles and straight through configurations
- ASME rated housings, ATEX certified housings
- Support legs
- Electronics package
- Custom configurations

- Wire mesh pre-separator strainer element
- Primary 5 micron polyester replacement element

Home |  Markets |  Resources |  Discover Solberg |  Contact |  International

Solberg Manufacturing is ISO 9001: 2008 Certified

Models, parameters, and specifications may change without notice.

Copyright © SMI 2009 All Rights Reserved