Solberg Manufacturing | Filters, Silencers, Vacuum Filters, Oil Mist Eliminators, Separators

Enter search terms in the box
and click 'Search'.

Part numbers must
include dashes.

Printer friendly version  Jump to downloads and documents

Blower Filter Elements, 32 Series

(Filter Elements commonly used in PD Blower packages. These are available in polyester, paper and wire mesh media.)

Part and Series Images 


32-16 PaperCross Reference - Stoddard: F8-1084.756.884.191 - 2 Weeks


  • 99%+ removal efficiency standard Polyester: 5 microns, Paper: 2 microns
  • Temp (continuous): min -15° F ( -26° C) max 220° F (104° C)
  • Filter change out differential: 15-20" H2O over initial delta P
  • Polyester - Reinforced with epoxy coated steel wire on both sides of cloth: expanded metal I.D.
  • Polyester - Washable with lukewarm water and mild detergent (Replacing element is recommended)
  • Paper - Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal O.D.
  • Pleated media for high dirt holding capacity
  • 40%-50% increased dust loading capacity with prefilter (part number suffix P)
  • Polyester - Less maintenance die to longer durability
  • Paper - Cost effective
  • Paper - Gently blow out media (Replacing element is recommended)
  • Polyester - Moisture resistant
  • Polyester - Handles hot air and oil mist from unload cycle of reciprocating/piston compressor


  • Blowers-PD Type


Product Documents

PD Blower Replacement Filtration Elements

Product Drawings


Home |  Markets |  Resources |  Discover Solberg |  Contact |  International

Solberg Manufacturing is ISO 9001: 2008 Certified

Models, parameters, and specifications may change without notice.

Copyright © SMI 2009 All Rights Reserved